Here share my real experience with ID-46 Nissan key programming via SKP-900, which may be helpful when you feel difficult or confused to finish smoothly.
1. Make direct connection between Nissan OBD II connector and SKP-900 Key Programmer via main cable. And then start the car with remote and wait a few seconds for SKP-900 to start.
2. Select NISSAN, and then choose NEW STRUCTURE and click Yes to proceed.
3. Select KEY 1 and click Yes.
4. Click IMMOBILIZER SYSTEM and Yes to continue.
5. Wait for a few minutes until it connects with the car.
6. Select FUNCTION SELECTION, and click KEY ADAPT, subsequently click Yes to continue.
7. Click YES.
8. You need to insert key and turn IGN on according to the screen instruction. You will find the IMMO indicator light flashed when you insert a key (NOTE: keep in mind not to start engine). Finally click Yes.
9. Close IGN switch and click YES.
10. Open IGN switch after system adapting and select YES.
11. Wait for a few minutes until the key is programmed successfully.
So far, the whole process to ID-46 Nissan key programming is well done.
Product Link: http://www.careucar.com/wholesale/superobd-skp-900-hand-held-obd2-auto-key-programmer.html
留言列表
