obd2diag03的部落格

Here share with you how to program new Peugeot key using Lexia3 PP2000.

Note: before starting, you need to download and install software, here offer video guide (divide into 2 parts) for your reference:

Link: http://www.chinaautodiag.com/html/lexia-3-lexia3-v46-citroen-peugeot-diagnostic-pp2000-v23-files-download-215.html

Note: now Lexia3 is available to update to the newest V48 (via CD that you will get if you buy at Uobd2)

Setup video guide:

Part1: https://www.youtube.com/watch?v=xs3-7LCWQtk

Part2: https://www.youtube.com/watch?v=hJY5jGTog6Q#t=723

The following part is all about the operation guide:

1. Open the software and enter into vehicle interface (here take Peugeot 307 as an example).

2. Connect the Peugeot Planet interface to the PC and to the vehicle, and then turn ignition on.

3. Next, it will pop out information of your vehicle.

4. Select Peugeot Planet 2000 and click OK to continue.

5. Select Test by ECU >> Built-in systems interface >> Learning >> Programming of keys.

6. Enter the key number to be learnt (Note: the number of keys to be programmed cannot exceed 5), and then click OK to proceed.

7. Key programmed, you need to turn ignition off and take out the key.

8. Insert the next key in the ignition (if you input 1 at Step 6, this step can be neglected). Key programmed, you need to turn ignition off and take out the key.

9. The information will be shown at picture below.

10. Next is the imperative you should keep in mind.

11. The following part is about Re-synchronize the HF remote controls procedure.

So far, it finished.